This 5 inch caravan reversing camera kit provides clear and reliable rear vision when towing. The system includes a monitor, two cameras and a suzie cable connection for quick and secure setup between the vehicle and caravan.
The two-camera setup allows one camera for reversing and one for rear vision while driving, improving awareness and safety on the road. The suzie cable makes connecting and disconnecting simple and dependable.
Ideal for caravans, camper trailers and touring setups where consistent rear visibility is essential.
Light commercial and domestic use – suitable for cars, caravans, camper trailers and light commercial vehicles. This system is not designed for heavy machinery, mining or industrial applications.

Click on the "Add Extra Cameras" Tab to add another camera to this kit. Extra cable length will be required and can be selected on the same page. The extra camera can be installed on the back of the vehicle and used for backing up to the hitch of the caravan and to drive with on all the time when the caravan is not being towed.

T4SpSML1C T4Sp1C.8m

Standard 10m & 15m Woza "Woza Cables" Select from the drop down box the cable lengths required.
The monitor comes with the U-Shaped Bracket

The reverse monitor comes with the U-Shaped Bracket

A suction bracket, a fan bracket or butterfly bracket can be purchased as an optional extra by clicking on the "Add Monitor Bracket" Tab.
The length of cable attached to the camera is approx. 350mm in length
10 Infrared Lights- Approx. Project Distance 7m if there is no other light source.

The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.

Suit Caravan or Truck Trailer Application (RV-HDMSD5T1C18052) |
| Kit Includes |
| • 1 x RV-HDMSD5 Caravan 5inch HD IPS Display Reverse Monitor |
| • 1 x R-C18052 Sharp CCD Eyeball Reversing Camera |
| • 1 x (T4SpSML1C) 4m Curly/Spring Cable, 1 x 10m Cable from the Curly/Spring Connection from the back of the vehicle to the Monitor, 1 x 15m Cable from the curly/spring connection to the camera on the back of the caravan. |
| • OR 1 x (T4Sp1C.8m) 4m Spring Curly Cable with 2 x 0.8m Cables Connecting to the Curly Spring and select two cable lengths and the price will adjust. |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • U-Support Bracket |
| • Monitor Supports Two Cameras, Additional Camera can be Added in the Future |
| • Other Mounting Options: A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the " Add Monitor Bracket" TAB |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.



The green trigger cables does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.




Accessories

5" Revering Camera Monitor (RV-HDMSD5) |
| • 5-inch AHD digital IPS Screen (With Removable Sun Visor) |
| • Resolution: 800 x 3(R.G.B) x 480 |
| • View Angle: Hor.L/ (70) R (70) Ver.UP (50) Down(70) |
| • Back Light: LED, 500cd/m² |
| • Image Reversion: Up/Down and Left/Right |
| • Compatible System: NTCS & PAL Automatically |
| • 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) |
| • 1 Channel AHD Audio Input : Channel 2 |
| • One Trigger Cable - Does not need to be connected wrap in insulation tap. |
| • Power Requirement: DC12V-24V input, 12V output |
| • Accessories: Remote Control, Power Supply Harness, Sun Visor |
| • Remote Control (Battery Not Included) |
| • U Type Bracket (Fan and Suction Brackets Optional) |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • Outer Dimension:140(W) X 102(H) X 26(56) (T) mm |
| • One Year Warranty |
Waterproof IP69K 90°High Quality Backup Camera
The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not quite wide enough however this camera is often mounted on the side of a canopy or on a roof rack for side vision. The camera eyeball lens can be tilted down, sideways or up to focus on a particular area.

10 Infrared Lights- Approx. Project Distance 7m if there is no other light source.
Camera Mounting


Camera Mounting






| Sharp Eyeball Camera (R-C18052) |
| • Image device: 1/3" SHARP COLOR CCD |
| • Effective Pixels: PAL: 752 x 582 |
| • Scanning System: PAL: 625 Lines 50 Field/sec |
| • Sync. System: Internal Synchronization |
| • Resolution: 600 TV Lines |
| • Gamma Characteristic: 0.45 |
| • S/N Ratio: ≥48dB(AGC Off) |
| • Electronic Shutter Time: On: PAL 1/50~1/100,000Sec; Off: PAL 1/50 Sec |
| • Usable Illumination: 0 lux with built-in IR LED |
| • IR project distance: 10 meters(10 Unit Infrared LED) |
| • IR Status: Under 10 Lux by CDS |
| • IR Power On: CDS Auto Control |
| • Lens: Board Lens 2.9mm/F2.0 Free Viewing Angle: 90° |
| • Video Output: 1.0Vp-p 75 ohm |
| • Gain Control(AGC): Auto |
| • Water resistance: IP69K |
| • Operation Temperature: -20℃~+50℃ RH95% Max |
| • Storage Temperature: -40℃~80 ℃, RH 95% MAX |
| • Power Supply: DC12V±10% 400mA |
| • Dimension: 55(L) x 63(W) x 74(H)mm |
| • Weight: 250g |
| • One Year Warranty |

Camera Magnet Bracket |
| • Products Compatible:NAS Cameras With U-Support Brackets |
| • Testing Standard:The 4.12.4 Term Of ISO16750-3 For Vibration Test- Able To Keep Still For 8 Hours When The Value Of Root Mean Square is 27.8m/s² |
| • Installation Instruction:Fix The Magnetic Base To The U-Support Bracket of Camera And Attach the Camera To The Vehicle |
| • Accessories:Washer d5 x 1, spring washer d5 x 1, hex-head screw M5 x 8 |
Front View:

Back View:

Dimensions: mm

Accessories

Application: Fix The Magnetic Base To The U-Support Bracket of Camera And Attach the Camera To The Vehicle

The 10M extension cable runs from the monitor to the car hitch and the 15M extension cable from the hitch to the back of the caravan or trailer. The curly spring cable is securely connected between the two extension cables.







The picture above shows a Woza installed however the model shown is an older model to the T4MSpSML1C.


0.8m Male Cable Connects to the Camera





The picture above shows a Woza installed however the model shown is an older model.