This 7 inch caravan reversing camera kit with woza cable provides clear and reliable rear vision when towing. The system features a RVCS clip-on mirror monitor paired with a RVCS 90° camera, delivering a practical and easy to use solution for everyday caravan use.
The mirror monitor clips over your existing rear view mirror, providing a simple installation and a clean, low-profile display inside the vehicle.
The 90° camera delivers a focused rear view, helping you better judge distance when reversing and manoeuvring.
The woza cable connection ensures a quick and secure link at the hitch, providing a stable signal between the vehicle and caravan with no interference.
The monitor supports two cameras, giving you the option to add an additional camera for improved visibility when driving or hitching up.
Designed for caravans and towing applications, this system delivers dependable performance on Australian roads.


The monitor can take up to two cameras


The Grid lines can be tuned on or off. The grid can be enlarged or made smaller in the monitor menu.

Reversing cameras with audio are ideal for towing a caravan, allowing drivers to hear guiding instructions while viewing the area behind. This combination of visual and auditory feedback ensures safer, more precise reversing, especially in tight spaces.

18pcs LEDs -Approx. 10m if there is no other light source.
T4SpSML1C T4Sp1C.8m
Standard 10m & 15m Woza "Woza Cables" Select from the drop down box the cable lengths required.
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. RVCS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable.

7" Caravan Rear View Kit (HDMSD87T1CHD13) |
| Kit Includes |
| • 1 x HDMSD87 Caravan 7inch HD IPS Display Reverse Monitor |
| • 1 x RV-HDCSD13 1080P HD Colour Rear View 90° Reversing Camera |
| • 1 x (T4SpSML1C) 4m Curly/Spring Cable, 1 x 10m Cable from the Curly/Spring Connection from the back of the vehicle to the Monitor, 1 x 15m Cable from the curly/spring connection to the camera on the back of the caravan |
| • OR 1 x (T4Sp1C.8m) 4m Spring Curly Cable with 2 x 0.8m Cables Connecting to the Curly Spring and select two cable lengths and the price will adjust |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • Monitor Supports Two Reversing Cameras, Additional Camera Can be Added in the Future |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.

The Grid lines can be tuned on or off. The grid can be enlarged or made smaller in the monitor menu.

The camera input 1/2 on the monitoring harness are equipped with audio capabilities.


The trigger cable gray does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger cable wrap it individually in insulation tape.




7" Car Rear View Mirror HD Monitor(R-HDMSD87) |
| • Screen size: 7" Digital IPS Screen MIRROR monitor |
| • Type: 16:9 wide screen |
| • Resolution: 1024(H) X 600(V) |
| • Colour system: PAL/ NTSC (AUTO) |
| • Video inputs: 2-CH inputs |
| • Audio: Yes |
| • Power requirement: 12V~24V DC |
| • Remote Control (Battery Not Included) |
| • MIRROR/NORMAL Switch: Yes |
| • Operating temperature: -10℃ to +65℃ |
| • Storage temperature: -30℃ to +80℃ |
| • Reverse trigger Automatic if wire is connected. |
| • Outer dimension: 253(L)x 108(W)x 23.5(H)mm |
| • Monitor Harness |
| • User Guide |
| • Monitor Takes Up to Two Cameras |
| • Monitor One Year Warranty |
The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. This viewing angle is suitable for backing up to tow balls. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera can be tilted down or up to focus on a particular area. The downfall of a 90° camera is when towing a trailer or caravan for example a truck or car behind you will look like it is much further away however it is right up behind you.



Measurements

1080P AHD Rear-View Camera 90° (RV-HDCSD13) |
| • Image Sensor: 1/3" CMOS |
| • Viewing Angle: 90° |
| • Effective Pixel: 1920(H) X 1080(V) |
| • Horizontal Resolution: 1080P |
| • Minimum Illumination: 0.5Lux |
| • Infrared LED Light: 18pcs |
| • System: PAL |
| • Shell material: Aluminium Alloy |
| • Waterproof rating: IP68 |
| • Power Supply: DC 12V |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • One Year Warranty |
The 10M extension cable runs from the monitor to the car hitch and the 15M extension cable from the hitch to the back of the caravan or trailer. The curly spring cable is securely connected between the two extension cables.







The picture above shows a Woza installed however the model shown is an older model to the T4MSpSML1C.


0.8m Male Cable Connects to the Camera





The picture above shows a Woza installed however the model shown is an older model.