Wired Caravan Reversing Camera Kit – Adjustable Viewing for Safe Towing
This 5 inch caravan reversing camera kit with woza cable provides clear and reliable rear vision when towing. The system includes a 90° side mounted eye ball camera that can be installed in various positions on the caravan and adjusted to focus on a specific area for improved visibility.
The eye ball design allows you to fine tune and fix the camera angle in place, giving you a consistent view of a chosen area when reversing or manoeuvring. The woza cable connection ensures a secure and stable link between the vehicle and caravan.
The monitor supports two cameras, giving you the option to add an additional camera for improved visibility when driving or hitching up.
Designed for caravans and towing applications, this system delivers dependable performance and improved safety on Australian roads.

Click on the "Add Extra Cameras" Tab to add another camera to this kit. Extra cable length will be required and can be selected on the same page. The extra camera can be installed on the back of the vehicle and used for backing up to the hitch of the caravan and to drive with on all the time when the caravan is not being towed.

T4SpSML1C T4Sp1C.8m

Standard 10m & 15m Woza "Woza Cables" Select from the drop down box the cable lengths required.
The reverse monitor comes with the U-Shaped Bracket

The monitor comes with the U-Shaped Bracket

A suction bracket, a fan bracket or butterfly bracket can be purchased as an optional extra by clicking on the "Add Monitor Bracket" Tab.
The length of cable attached to the camera is approx. 300mm in length

90° Camera (C18032)
10pcs LEDs - Approx. 7m if there is no other light source.
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.

| Kit Includes |
| • 1 x RV-HDMSD5 Caravan 5inch HD IPS Display Reverse Monitor |
| • 1 x R-C18032 Sharp CCD Sideview Reversing Camera |
| • 1 x (T4SpSML1C) 4m Curly/Spring Cable, 1 x 10m Cable from the Curly/Spring Connection from the back of the vehicle to the Monitor, 1 x 15m Cable from the curly/spring connection to the camera on the back of the caravan. |
| • OR 1 x (T4Sp1C.8m) 4m Spring Curly Cable with 2 x 0.8m Cables Connecting to the Curly Spring and select two cable lengths and the price will adjust. |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • U-Support Bracket |
| • Monitor Supports Two Cameras, Additional Camera can be Added in the Future |
| • Other Mounting Options: A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the " Add Monitor Bracket" TAB |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.



The green trigger cables does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.




Accessories

5" Revering Camera Monitor (RV-HDMSD5) |
| • 5-inch AHD digital IPS Screen (With Removable Sun Visor) |
| • Resolution: 800 x 3(R.G.B) x 480 |
| • View Angle: Hor.L/ (70) R (70) Ver.UP (50) Down(70) |
| • Back Light: LED, 500cd/m² |
| • Image Reversion: Up/Down and Left/Right |
| • Compatible System: NTCS & PAL Automatically |
| • 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) |
| • 1 Channel AHD Audio Input : Channel 2 |
| • One Trigger Cable - Does not need to be connected wrap in insulation tap. |
| • Power Requirement: DC12V-24V input, 12V output |
| • Accessories: Remote Control, Power Supply Harness, Sun Visor |
| • Remote Control (Battery Not Included) |
| • U Type Bracket (Fan and Suction Brackets Optional) |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • Outer Dimension:140(W) X 102(H) X 26(56) (T) mm |
| • One Year Warranty |

The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera eyeball lens can be tilted down, sideways or up to focus on a particular area.

10 Infrared Lights- Approx. 7m if there is no other light source.


The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.






If your intention is to install one of NAS's Cameras on another brand of reversing camera monitor or Navigation/Stereo System then you may require a RCA cable. Please click here to view RCA Cables.
Side View Camera C18032 |
| • Lens Angle: 90° |
| • Image device: 1/3" SHARP COLOUR CCD |
| • Effective Pixels: PAL: 752(H)×582(V) |
| • Sensing Area: 4.9mm(H)×3.7mm(V) |
| • Scanning System: PAL:625 Lines 50 Field/sec |
| • Sync. System: Internal |
| • Resolution: 600 TV Lines |
| • Electronic Shutter Time On: PAL 1/50~1/100,000Sec; Off: PAL 1/50 Sec |
| • Usable Illumination: 0 lux with built-in IR LED |
| • IR project distance: 10 meters(10 Unit Infrared LED) |
| • IR Status: Under 10 Lux by CDS |
| • Gamma Consumption: 0.45 |
| • Lens: Board Lens 2.9mm |
| • Gain Control(AGC):Auto |
| • Waterproof Rating: IP69K |
| • Operation Temperature:-20℃~+50℃ RH95% Max |
| • Storage Temperature: -40℃~+80℃ RH95% Max |
| • Power Supply:DC12V±10% 400mA |
| • Dimension: 60(L) x 75(W) x 90(H)mm |
| • Weight: 400g |
| • One Year Warranty |
The 10M extension cable runs from the monitor to the car hitch and the 15M extension cable from the hitch to the back of the caravan or trailer. The curly spring cable is securely connected between the two extension cables.







The picture above shows a Woza installed however the model shown is an older model to the T4MSpSML1C.


0.8m Male Cable Connects to the Camera





The picture above shows a Woza installed however the model shown is an older model.