The high quality 7" monitor screen is viewable under sunlight conditions. It features white lasered engraved buttons that are backlit for clear day and night vision. The monitor shell is made from tough PC/ABS to withstand high temperatures in the cab.
The In-Plane Switching (IPS) is a liquid crystal display with wide viewing angle, high colour accuracy and brightness.


4pcs High Quality SMD LEDs - 5M if there is not other light source.
Monitor Viewing Configuration
The reverse monitor can take up to two cameras.

The reverse monitor comes with the U-Shaped Bracket


A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by Clicking on the "Monitor Bracket" Tab.

The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS Electronics cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS Electronics monitors have the 4-pin male ended connection and require the female ended extension cable.

| Kit Includes |
| • 1 x HDM72C 7" IPS HD IPS Screen Reverse Monitor With Touch Buttons & Removable Sun Visor |
| • 1 x CS8087 1/3" SHARP 960H CCD 92° Viewing Angle Reversing Camera |
| • 1 x 8m Cable |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • Monitor Supports Two Reversing Cameras |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.





The trigger cables, typically Yellow, Brown, Blue, and White, do not need to be connected. They only require connection if you desire automatic camera activation, such as when the vehicle is shifted into reverse. However, if you connect the trigger wires, continuous camera viewing while driving won't be possible. If you choose not to connect the trigger cables, ensure to wrap each one individually in insulation tape.
720P HD 7" Cabled Monitor (HDM72CN) |
| • 7" IPS HD Screen Monitor With Touch Buttons with Removable Sun Visor |
| • Touch Button Controls |
| • Vibration Resistance Level: 5G (Conforms To GB-T2423056-2006 Standard) |
| • View Monitor: Single Screen Switch |
| • Colour System: PAL/NTSC (Auto) |
| • Display Resolution: 1024(H) X 600(V) |
| • Surge and load dump protection: ISO16750-2 standard (24V system Us=174V,Ri=4Ω,td=350ms) |
| • Time Delay (Ms):25ms |
| • Wide View Angle (LR/UD):(U/D): 80/85 (L/R): 80/85 |
| • Brightness: 600cd/m² |
| • Contrast Ratio: 800:1 |
| • Power Supply: DC11~32V |
| • Operating Temperature: -20℃ To +70℃ |
| • Storage Temperature: -30℃ To +80℃ |
| • External Dimensions :(L x W x T) 220 x 149 x 84mm |
| • Weight Approx: 1000g |
| • Two Year Warranty |





Mini CCD Reversing Camera Model: CS8087 |
| • Lens Angle: 92° |
| • Image device: 1/3" SHARP 960H CCD |
| • Effective Pixels: PAL: 752 × 582 |
| • Sensing Area: 4.9mm(H)×3.7mm(V) |
| • Scanning System: Interlace |
| • Sync. System: Internal |
| • Waterproof: IP69K |
| • Resolution: 600 TV Lines |
| • Night Vision Distance: Approx. 5m |
| • Horizontal Sync. Frequency: 15.625KHz/15.734KHz |
| • Vertical Sync. Frequency: 50Hz/60Hz |
| • Minimum Illumination: 0Lux(Infrared lamps on) 0.05Lux(day)/F1.2 |
| • Video Output: 1.0Vp-p, 75Ohm |
| • Gamma Consumption: 0.45 |
| • AGC: ON |
| • Signal to noise ratio: Better than 48dB |
| • White balance: Auto |
| • Electronic Shutter: Auto:1/50(PAL)~1/100000 |
| • Backlight Compensation: Auto |
| • Power Supply: DC12V |
| • Power Consumption: 150mA |
| • Operating Temperature: -30℃~70℃ , RH 95% MAX |
| • Storage Temperature: -40℃~80 ℃, RH 95% MAX |
| • One Year Warranty |