Cart is empty
Please sign in so that we can notify you about a reply
This 12.3 inch AI digital mirror camera system is designed to replace traditional side mirrors on trucks and buses, providing a clear and modern driver vision solution. The dual camera setup delivers live images to the in-cab monitor, improving visibility around the vehicle and reducing blind spots.
The system uses AI technology to detect pedestrians, vehicles, and hazards, providing visual alerts to help drivers respond quickly and safely. It is especially effective for monitoring blind spots when changing lanes or manoeuvring in tight areas.
Designed for heavy vehicles and commercial use, this system improves driver awareness and safety while delivering clear vision in all conditions, including low light and poor weather.
Class II Upper Camera
Meets the Angle Requirements of Class II Rear-View Mirror (R46 Regulation)
20°Horizontal - 35°Vertical Viewing Angle (Opposite Angle 40°)
Class IV Lower Camera
Meets the Angle Requirements of Class IV Rear-View Mirror (R46 Regulation)
71°Horizontal - 63°Vertical Viewing Angle (Opposite Angle 92°)
UN ECE R46 Regulations
R46 is a mandatory directive in the EU that requires the installation of devices on trucks weighing over 3.5 tonnes specifically designed to monitor traffic and pedestrians in areas around the vehicles that are not directly visible to the driver, addressing blind spots.
The image illustrates the camera perspectives using two dual cameras—one located on the left and the other on the right side of the vehicle.
Robust HD 1080P Small In Size Camera Waterproof IP69K
The Cameras are a Compact Low-Profile Design
Camera Installation Position of Horizontal Distance and Height
Monitor Traffic Warning Distance Lines and AI Pedestrians & Vehicles Detection
Monitor Built-in DVR Recording & G-Sensor
Supports Looped Recording and Video Playback. With Built-in G-sensor.
3s Output Speed, Start Displaying Images and Recording Videos within 3 Seconds After Powered.
Supports up to 512G SD Card (SD Card Not Included)
Approx. Recording Time 512G SD Card Two 1080P Cameras 150 Hours
(Two 720P Cameras 300 Hours, recording resolution 1080P & 720P optional).
Integrated G-Sensor for Automatic Video Recording and Collision Detection
Distance Between the Monitor and the ORP
Enhanced Vision in All Weather Conditions And Glare Prevention
The monitor and cameras are of superior quality and provide optimum vision in all weather conditions. The monitor has glare prevention function, which relies on digital camera signals rather than mirror imaging, it can process strong light sources and rectify the glare problem. The Camera has the WDR (Wide Dynamic Range) function which enables the camera to better handle strong light contrasts.
Two Kits are required if vision is required on both sides of the vehicle.
Monitor Comes With a RAM Mounting Bracket
A VESA Mounting Bracket Optional
Camera Connection 4 Pin Waterproof Female Plug GX12 Aviation Plug
12.3-inch Monitor Camera Kit Connection & Application
| One Kit Includes HDMirM12.3PDualR |
| • 1 x HDMirM12.3P Superior Quality 12.3inch HD IPS Display Monitor |
| • 1 x HDMirCDual2070R HD1080P Dual Camera for the RIGHT |
| • 2 x 5m Cables |
| • Remote Control (Battery Not Included) |
| • Electrical Connecting Cables |
| • User Guide |
The images displayed on the monitors in any media form are for presentation purposes only.
12.3-inch HD Dual-Screen Electronic Mirror AI Monitor For Trucks & Buses -- Advanced Blind Spot Detection System
Monitor Parts
Monitor Button Panel
Monitor Dimensions
Front View
Rear View
Monitor Comes With a RAM Mounting Bracket
A VESA (Video Electronics Standards Association) Mounting Bracket Optional
Monitor has the 4-Pin GX12 Male Screw Plug Connection
12.3" Truck or Bus Monitor With AI Pedestrians & Vehicle Detection to Replace Side Mirror (HDMirM12.3P) |
| • Resolution: 1920 x 3 (RGB) x 720 |
| • Video Input: 2-Channel Cameras Input |
| • Displays Images & Will Commence Recording Within 3 Seconds after Powering Up. |
| • With AI Pedestrians & Vehicles Detection |
| • Supports Recording & Video Playback |
| • Supports Micro SD Card 512G (Max.) SD Card Not Included. |
| • Supports ACC Time Lapse Recording |
| • Support Remote Operation (Remote Control Battery Not Included) |
| • With Super Capacitor, Support Power Failure Protection |
| • With Short Circuit Protection |
| • Built-in G-Sensor Supports Alarm Video Recording by G-Sensor Collision Detection. |
| • IPS Screen |
| • Automatic Back Lighting for Automatic Brightness Control. |
| • Full-Function Remote Control |
| • Audio input: No |
| • Split Screen: Yes |
| • Max. brightness: 1000cd/m² |
| • Contrast: 1000:1 |
| • Viewing Angle Monitor: U:85°/D:85°, R/L:85°/85° |
| • Anti-Vibration Shockproof Rating : ISO 16750 2012 (2.13G) |
| • Power Consumption: Max. 32W (with cameras) |
| • Power Input: DC 10V-32V |
| • Operating Temperature: -20~+70°C, RH90% |
| • Storage Temperature: -30~+80°C, RH90% |
| • Compliance with R46/ E-mark/CE/FCC Standards |
| • Two Year Warranty |
HD 1080p Small Compact Camera Waterproof IP69K
Heavy duty, suitable for Heavy Equipment, Trucks, Forklifts, Cranes, Farming Machinery, & Shipping.
PLEASE NOTE: These cameras will only work on AHD/HD Monitors.
Camera II Fields of Vision
Camera IV Fields of Vision
Camera Dimensions
Secure Waterproof Cable Connections
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.
Cameras have the 4 Pin Waterproof Female Plug GX12 Aviation Plug Connection
HD 1080P Rear View Dual Camera (HDMirCDual2070) |
| • Resolution: 1080P |
| • WDR (Wide Dynamic Range): >100dB |
| • Waterproof: IP69K approved |
| • Viewing angle: Upper Camera 20°(H) 35°(V); Lower Camera 71°(H) 63°(V); |
| • Lens: Upper Camera f= 6.0mm; Lower Camera f=2.3mm |
| • Upper Camera: Meets The Angle Requirements of Class II Rear-view Mirror. |
| • Lower Camera: Meets The Angle Requirements of Class IV Rear-view Mirror. |
| • Image Device: 1/2.8” CMOS |
| • Frame Rate: 30fps |
| • Effective Pixels: 1920 (H) x 1080 (V) |
| • Camera Demisting Function: Optional |
| • Frame Rate: 25fps/30fps |
| • Pixel pitch 2.9 μm x 2.9 μm |
| • Scanning System: Progressive Scanning |
| • Sync. System: Internal |
| • Minimum Illumination: 0.1 Lux |
| • Video Output: 1.0Vp-p, 75Ohm |
| • Gamma Consumption: 0.45 |
| • Minimum Illumination: 0.1 Lux |
| • Night Vision Distance: 5m （with light） |
| • White Balance: Auto |
| • Electronic Shutter: 1/30（1/25）～1/50,000 Seconds |
| • BLC: Auto |
| • AGC: Auto |
| • Power Supply: DC 12 ~32V |
| • Connection: 4 PIN |
| • Operating Temperature: –40℃ ~ 105℃, RH95%MAX. |
| • Storage Temperature: –50℃ ~ 110℃, RH95%MAX. |
| • One Year Warranty |