7 Inch Quad Reversing Camera Kit 4 Camera 90 Degree Light Commerial

$709.00
RV-HDMSD7Quad 4*CHD13-RVCS
In stock
+ −

This 7 inch quad reversing camera kit includes four 90 degree cameras, providing clear visibility around your vehicle to help reduce blind spots when driving and reversing. It is ideal for cars, vans, four wheel drives, and camper vans where improved safety and awareness are important.  The quad monitor allows you to view up to four camera angles using split screen, giving you a complete view of your surroundings. The system delivers a sharp HD image and is designed for easy operation during everyday use.  Built for Australian conditions, this wired system offers reliable performance for domestic and light commercial vehicles where safer manoeuvring and full vehicle visibility are essential.

Monitor Supports Four HD Cameras

Click on the "Add HD Cameras" Tab to add more cameras to this monitor.  Extra cable length will be required and can be selected on the same page.

Audio

The camera input 1 on the monitoring harness is equipped with audio capabilities.

Monitor Viewing Configuration

Mounting Bracket

The monitor comes with the U-Shaped Bracket

Mounting Bracket

Other Mounting Bracket Options

A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by Clicking on the "Monitor Bracket" Tab. A suction bracket would not be recommended unless it was used to hold the monitor in place resting on the dash.

Suction or Fan Bracket Slides into Slot.

1080P AHD Waterproof IP68 Reversing Camera

Option to Add Audio

Waterproof IP67 with Audio

Reversing cameras with audio are ideal for towing a caravan, allowing drivers to hear guiding instructions while viewing the area behind. This combination of visual and auditory feedback ensures safer, more precise reversing, especially in tight spaces. 

90° Rear-View Camera

The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. This viewing angle is suitable for backing up to tow balls. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera can be tilted down or up to focus on a particular area. The downfall of a 90° camera is when towing a trailer or caravan for example a truck or car behind you will look like it is much further away however it is right up behind you.

90 Degree Reversing Camera Angle

Reversing Camera Night Vision Distance

18pcs LEDs -Approx. 10m if there is no other light source.

Secure Waterproof Cable Connections

The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. RVCS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. 

Secure Waterproof Cable Connections
7" Truck Rear View Monitor Camera Kit (RV-HDMSD7Quad 4*CHD13-RVCS)
Kit Includes
• 1 x RV-HDMSD7Quad  Truck 7inch Quad IPS AHD Display Reverse Monitor
• 4 x RV-HDCSD13 1/3" HD 1080P CMOS 90° Reversing Camera
• 4 x 8m Cable
• Electrical Connecting Cables
• Remote Control (Battery Not Included)
• Monitor Supports Four Cameras
• Other Mounting Options: A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the " Add Monitor Bracket" TAB

The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.

7INCH AHD 720P Trucking Farming Monitor


Monitor Supports Four HD Cameras

Monitor Viewing Configuration

Mounting Bracket

The monitor comes with the U-Shaped Bracket

Mounting Bracket

Other Mounting Bracket Options

A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the "Add Monitor Bracket" Tab.  A suction bracket would not be recommended unless it was used to hold the monitor in place resting on the dash.

Suction or Fan Bracket Slides into Slot.


Monitor Dimension

Monitor Harness


The trigger cables do not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.

Monitor has the 4pin GX12 Male Screw Plug Connection

Accessories

Monitor U-bracket Installation


7" HD 720P Revering Quad Monitor (RV-HDMSD7Quad)
• 7-inch QUAD AHD IPS Screen (With Removable Sun Visor)
• Resolution: 1024 x 3(R.G.B) x 600 
• Viewing Angle: L/R: 85°, Up/Down: 85°
• Back Light: LED, 500cd/m²
• Image Reversion: Up/Down and Left/Right
• Light Sensor Automatic Adjustment
• 4 Video Input, 1 Audio Input For CH1
• 4 Trigger Cables (Trigger Priority: CH2>CH1>CH3>CH4)
• Full image/2 splits/3 splits/4 splits(H and four quarters) adjustable
• Compatible System: NTCS & PAL Automatically
• 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) 
• 1 Channel AHD Audio Input : Channel 1
• Four Trigger Cables - Does not need to be connected wrap in insulation tap.
• Power Requirement: DC12V-24V input, 12V output
• Accessories: Remote Control, Power Supply Harness, Sun Visor
• Remote Control (Battery Not Included)
• U Type Bracket (Fan and Suction Brackets Optional)
• Working temperature: -20℃ ~ +70℃
• Storage Temperature: -30℃~ + 80℃
• Outer Dimension: 211(W) X 134.5(H) X 76 (T) mm 
• One Year Warranty

The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.

90° Rear-View AHD 1080P Camera

The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. This viewing angle is suitable for backing up to tow balls. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera can be tilted down or up to focus on a particular area. The downfall of a 90° camera is when towing a trailer or caravan for example a truck or car behind you will look like it is much further away however it is right up behind you.

Camera Dimensions

4-Pin GX12 Screw Female Definition

Measurements

1080P AHD Rear-View Camera 90° (RV-HDCSD13)
• Image Sensor: 1/3" CMOS
• Viewing Angle: 90°
• Effective Pixel: 1920(H) X 1080(V)
• Horizontal Resolution: 1080P
• Minimum Illumination: 0.5Lux
• Infrared LED Light: 18pcs
• System: PAL
• Shell material: Aluminium Alloy
• Waterproof rating: IP68
• Power Supply: DC 12V
• Working temperature: -20℃ ~ +70℃
• Storage Temperature: -30℃~ + 80℃
• One Year Warranty


BSN
$23.00
Metal Top Suction Bracket Mount 360 Rotatable Universal Rotating Bead Ball Joint This strong suction windscreen monitor mount is designed for...
In stock
+ −

R-BF
$20.00
This fan bracket monitor mount is designed to provide a secure and stable mounting solution for vehicle monitors. Built for durability, it ensures...
In stock
+ −

BB
$20.00
Butterfly bracket for mounting a reversing camera monitor on the dash. This brackets allows you to modify the angle of the monitor. Comes with adhesive pad.
In stock
+ −