This 7 inch AHD reversing camera kit is designed to improve rear visibility and safety when reversing and manoeuvring. The larger HD monitor provides a clear, easy-to-view display, helping drivers reduce blind spots and operate with confidence. The system includes a waterproof 1080P camera with a 90 degree viewing angle, offering a balanced view behind the vehicle. This angle provides good coverage while still allowing accurate distance judgement when reversing or aligning with a tow ball. Suitable for cars, utes, vans, and 4WD vehicles, this system delivers reliable performance for everyday use. The wired connection ensures a stable, interference-free signal for consistent operation. The monitor supports up to two cameras, allowing an additional camera to be added for expanded rear or side visibility if required. This makes it a practical and dependable solution for improving reversing safety and vehicle awareness.


The monitor comes with the U-Shaped Bracket


A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by Clicking on the "Monitor Bracket" Tab.
Reversing cameras with audio are ideal for towing a caravan, allowing drivers to hear guiding instructions while viewing the area behind. This combination of visual and auditory feedback ensures safer, more precise reversing, especially in tight spaces.

The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. This viewing angle is suitable for backing up to tow balls. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera can be tilted down or up to focus on a particular area. The downfall of a 90° camera is when towing a trailer or caravan for example a truck or car behind you will look like it is much further away however it is right up behind you.

18pcs LEDs -Approx. 10m if there is no other light source.
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. RVCS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable.

7" Car Rear View Monitor Camera Kit (RV-HDMSD7CHD13-RVCS) |
| Kit Includes |
| • 1 x RV-HDMSD7 Car 7inch IPS AHD Display Reverse Monitor |
| • 1 x RV-HDCSD13 1/3" CMOS 1080P Reversing Camera 90° |
| • 1 x 8m Cable |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • Monitor Supports Two Cameras, Additional Camera can be Added in the Future |
| • Other Mounting Options: A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the " Add Monitor Bracket" TAB |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.
7inch, 7", Car, Rear, View, rearview, backup, Camera, Kit


The monitor comes with the U-Shaped Bracket


The green trigger cables does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.





7" Revering Camera Monitor (RV-HDMSD7) |
| • 7-inch AHD digital IPS Screen (With Removable Sun Visor) |
| • Resolution: 1024 x 3(R.G.B) x 600 |
| • Viewing Angle: L/R: 85°, Up/Down: 85° |
| • Back Light: LED, 500cd/m² |
| • Image Reversion: Up/Down and Left/Right |
| • Compatible System: NTCS & PAL Automatically |
| • 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) |
| • 1 Channel AHD Audio Input : Channel 2 |
| • One Trigger Cable - Does not need to be connected wrap in insulation tap. |
| • Power Requirement: DC12V-24V input, 12V output |
| • Accessories: Remote Control, Power Supply Harness, Sun Visor |
| • Remote Control (Battery Not Included) |
| • U Type Bracket (Fan and Suction Brackets Optional) |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • Outer Dimension:211(W) X 134.5(H) X 76 (T) mm |
| • One Year Warranty |
The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. This viewing angle is suitable for backing up to tow balls. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera can be tilted down or up to focus on a particular area. The downfall of a 90° camera is when towing a trailer or caravan for example a truck or car behind you will look like it is much further away however it is right up behind you.



Measurements

1080P AHD Rear-View Camera 90° (RV-HDCSD13) |
| • Image Sensor: 1/3" CMOS |
| • Viewing Angle: 90° |
| • Effective Pixel: 1920(H) X 1080(V) |
| • Horizontal Resolution: 1080P |
| • Minimum Illumination: 0.5Lux |
| • Infrared LED Light: 18pcs |
| • System: PAL |
| • Shell material: Aluminium Alloy |
| • Waterproof rating: IP68 |
| • Power Supply: DC 12V |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • One Year Warranty |