Cart is empty
Please sign in so that we can notify you about a reply
This 5 inch caravan reversing camera kit is designed to improve safety and visibility when towing across Australian conditions. The system includes a clear display monitor and a side-mounted movable eye ball camera, providing a reliable rear view for reversing and driving.
The 90° camera delivers consistent coverage behind your caravan, while the adjustable eye ball design allows you to fine-tune the viewing angle to suit your setup. Dust covers are included to protect cable ends when the caravan is not connected, helping to prevent damage from dirt, moisture, and road exposure.
The monitor supports two cameras, allowing you to add an additional camera to your setup if required. This makes it easier to hitch up and maintain visibility when driving without the caravan attached.
Built for everyday use, this kit is ideal for caravans, camper trailers, and touring setups where dependable rear vision is essential.
Monitor Supports Two Reversing Cameras
Click on the "Add Extra Camera" Tab to add another camera to this kit. Extra cable length will be required and can be selected on the same page. The extra camera can be installed on the back of the vehicle and used for backing up to the hitch of the caravan and to drive with on all the time when the caravan is not being towed.
Monitor Viewing Configuration
Metal Cable Dust Covers
Protect your cable ends when the caravan is unhooked with our custom-designed dust covers. Screw the dust covers onto both the car and caravan cable ends for durable, weather-resistant defense against dust, dirt, and moisture. The snug fit ensures optimal cable condition, extending your camera system's lifespan.
Mounting Bracket
The monitor comes with the U-Shaped Bracket
The monitor comes with the U-Shaped Bracket
Other Mounting Bracket Options
A suction bracket, a fan bracket or a butterfly bracket can be purchased as an optional extra by clicking on the "Add Monitor Bracket" Tab.
Waterproof IP69K Commercial Grade Reversing Camera
The length of cable attached to the camera is approx. 300mm in length
Reversing Camera Angle
90° Camera (C18032)
Reversing Camera Night Vision Distance
10pcs LEDs - Approx. 7m if there is no other light source.
Secure Waterproof Cable Connections
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. RVCS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable.
5" Caravan Rear View Kit (RV-HDMSD5C32MFDustCover-RVCS) |
| Kit Includes |
| • 1 x RV-HDMSD5 Caravan 5inch HD IPS Display Reverse Monitor |
| • 1 x R-C18032 Sharp CCD 600 TV Lines Reversing Camera |
| • 2 x 8m Cable (One cable from the monitor to the back of the car, another from the car to the back of caravan.) |
| • 1 x Male Metal Dust Cover (MDustCover) |
| • 1 x Female Metal Dust Cover (FDustCover) |
| • Electrical Connecting Cables |
| • Remote Control (Battery Not Included) |
| • User Guide |
| • Monitor Supports Two Reversing Cameras, Additional Camera can be Added in the Future |
| • Other Mounting Options: A suction bracket or a fan bracket can be purchased as an optional extra by clicking on the " Add Monitor Bracket" TAB |
The images displayed on the monitors in any media form are for presentation purposes only and may or may not be a true reflection of the image produced.
5-inch AHD Reversing Cabled Monitor
Monitor Dimensions
Monitor Harness
The green trigger cables does not have to be connected, it only requires connection if you want a camera to come on automatically for example when the vehicle is put in reverse. If the trigger wire is connected, then you will not be able to view the camera at all times whilst driving. If not connecting the trigger wire wrap it individually in insulation tape.
Monitor has the 4-Pin GX12 Male Screw Plug Connection
Monitor U-bracket Installation
Accessories
5" Revering Camera Monitor (RV-HDMSD5) |
| • 5-inch AHD digital IPS Screen (With Removable Sun Visor) |
| • Resolution: 800 x 3(R.G.B) x 480 |
| • View Angle: Hor.L/ (70) R (70) Ver.UP (50) Down(70) |
| • Back Light: LED, 500cd/m² |
| • Image Reversion: Up/Down and Left/Right |
| • Compatible System: NTCS & PAL Automatically |
| • 2 Channel AHD Video Input, single image display, support 720P@25/30, 960P@50/60, 1080P@25/30 (Video Compatibility: CVBS/AHD) |
| • 1 Channel AHD Audio Input : Channel 2 |
| • One Trigger Cable - Does not need to be connected wrap in insulation tap. |
| • Power Requirement: DC12V-24V input, 12V output |
| • Accessories: Remote Control, Power Supply Harness, Sun Visor |
| • Remote Control (Battery Not Included) |
| • U Type Bracket (Fan and Suction Brackets Optional) |
| • Working temperature: -20℃ ~ +70℃ |
| • Storage Temperature: -30℃~ + 80℃ |
| • Outer Dimension:140(W) X 102(H) X 26(56) (T) mm |
| • One Year Warranty |
Waterproof IP69K 90°High Quality Backup Camera
90° Rear-View Camera
The 90° viewing angle is a popular reversing camera and it will provide an adequate view of both lanes on a highway and has a sufficient angle for backing into tight places. The 90° viewing angle is not recommended for Utes that have closed in canopies with no rear vision because the angle is not wide enough. The camera eyeball lens can be tilted down, sideways or up to focus on a particular area.
Night Vision Distance
10 Infrared Lights- Approx. 7m if there is no other light source.
Camera Mounting
Camera Dimensions
Secure Waterproof Cable Connections
The connections on the reversing / rear-view camera cables push in and then screw up creating a secure connection. They come with rubber O-rings creating a waterproof join. The extension cable is airline aviation cable and has a 4-pin female end and a 4-pin male end. NAS cameras come with a 4-pin female ended connection and require the 4 pin male ended extension cable. NAS monitors have the 4-pin male ended connection and require the female ended extension cable.
4pin Male Screw Definition
4pin Female Screw Definition
Cameras have the 4 Pin Waterproof Female Plug GX12 Aviation Plug Connection
If your intention is to install one of NAS's Cameras on another brand of reversing camera monitor or Navigation/Stereo System then you may require a RCA cable. Please click here to view RCA Cables.
Side View Camera C18032 |
| • Lens Angle: 90° |
| • Image device: 1/3" SHARP COLOUR CCD |
| • Effective Pixels: PAL: 752(H)×582(V) |
| • Sensing Area: 4.9mm(H)×3.7mm(V) |
| • Scanning System: PAL:625 Lines 50 Field/sec |
| • Sync. System: Internal |
| • Resolution: 600 TV Lines |
| • Electronic Shutter Time On: PAL 1/50~1/100,000Sec; Off: PAL 1/50 Sec |
| • Usable Illumination: 0 lux with built-in IR LED |
| • IR project distance: 10 meters(10 Unit Infrared LED) |
| • IR Status: Under 10 Lux by CDS |
| • Gamma Consumption: 0.45 |
| • Lens: Board Lens 2.9mm |
| • Gain Control(AGC):Auto |
| • Waterproof Rating: IP69K |
| • Operation Temperature:-20℃～+50℃ RH95% Max |
| • Storage Temperature: -40℃～+80℃ RH95% Max |
| • Power Supply:DC12V±10% 400mA |
| • Dimension: 60(L) x 75(W) x 90(H)mm |
| • Weight: 400g |
| • One Year Warranty |